[Feb-2022] Free NS0-516 Exam Dumps to Improve Exam Score
2022 Realistic NS0-516 Dumps Exam Tips Test Pdf Exam Material
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Toolbox | -Describe the tools required to design and implement an E-Series solution. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
| Documentation | -Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
NEW QUESTION 81
Which component of an E-Series storage system should always be upgraded first? (Choose the best answer.)
- A. ESM firmware
- B. SANtricity management client
- C. Controller firmware
- D. Controller NVSRAM
Answer: C
NEW QUESTION 82
Exhibit:
Referring to the exhibit, which SAS connector is supported on the NetApp E2800 E-Series family?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 83
When you power off a storage system, which component should be powered off first?
- A. The controller shelf
- B. All disk shelves
- C. The configuration database
- D. The SANtricity client
Answer: A
NEW QUESTION 84
What is a best practice recommendation for the automated system monitor? (Choose the best answer.)
- A. It should only be run on Windows server systems.
- B. It should be stopped during storage system normal operations.
- C. It should run on all storage manager clients.
- D. It should only run on one client connected to the storage system.
- E. It should be stopped during a controller firmware upgrade.
Answer: E
NEW QUESTION 85
Exhibit:
Referring to the exhibit, what is the total number of ALUA paths from the host to a volume on the EF280?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 86
Storage system volumes can be built upon what two types of logical structures? (Choose the best answer.)
- A. Volume Groups and Disk Pools
- B. Virtual Disks and Disk Pools
- C. Volume Pools and Virtual Disks
- D. Volume Pools and Volume Groups
- E. Volume Groups and Virtual Disks
Answer: A
NEW QUESTION 87
Which three methods can be used to increase the space available to clients? (Choose three.)
- A. Replace some HDD with SSD
- B. Fill empty drive slots in the array
- C. Create new volume groups from unconfigured capacity
- D. Increase volume segment size
- E. Convert RAID-6 volume group to RAID-5
Answer: B,C,D
NEW QUESTION 88
What is the 'base' host connectivity provided by the E5500 Controller? (Choose the best answer.)
- A. SAS
- B. FC
- C. iSCSI
- D. iSCSI
- E. IB
Answer: B
NEW QUESTION 89
Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two)
- A. Configure In-Band Management
- B. Map roles
- C. Configure LDAP
- D. Test SSO login
Answer: B,C
NEW QUESTION 90
An administrator is asked to create an asynchronous mirroring environment that supports multiple mirroring relationships, each with different recovery point objectives (RPOs).
In this scenario, how does the administrator create this environment?
- A. The administrator creates a mirror group with the appropriate RPOs
- B. The administrator creates a single consistency group with multiple RPOs
- C. The administrator creates multiple mirror pairs, each with their own schedule and RPO
- D. The administrator creates multiple mirror consistency groups with the appropriate RPOs
Answer: A
NEW QUESTION 91
What is the SANtricity Client? (Choose the best answer.)
- A. An OS-dependent collection of utilities for servers attached to SANtricity-managed storage systems
- B. Inter-process communication that supports computer program subordinates
- C. A host I/O performance modeling interface
- D. A GUI or CLI run on a host server used for storage system management
- E. A host server process that enables storage system management with the storage data path
Answer: A
NEW QUESTION 92
Is this E5624 storage system cabled according to recommended practices? If not, why?
- A. Yes. The cabling configuration is correct.
- B. No. Controller A should be cabled to the right ESMs, instead of the left ESMs and Controller B should be cabled to the left ESMs instead of the right ESMs.
- C. No. The controllers should be cabled to the last disk shelf first.
- D. No. Each controller is only cabled to one set of ESMs in the disk shelves.
Answer: D
NEW QUESTION 93
An administrator is asked to create a Dynamic Disk Pools (DDP) pool from eleven 12 TB disks with the requirement that there is adequate space available for a reconstruction if a drive in the pool fails.
In this scenario, what should the administrator do to satisfy this requirement?
- A. Create the disk pool, and then create a hot spare on another 12 TB disk
- B. Create the disk pool, and then add another 12 TB drive to the pool
- C. Create the disk pool, and then edit the pool to reserve 12 TB of space
- D. Create the disk pool, and then the system automatically reserves 12 TB of space
Answer: A
NEW QUESTION 94
What function can the storage system use to preserve cache data in the event of a complete controller failure?
- A. Cache mirroring
- B. Pre-fetch caching
- C. Read caching
- D. Write caching
- E. SSD read cache
Answer: A
NEW QUESTION 95
Exhibit:
An administrator is asked to create a 5532 GiB volume from the volume group.
Referring to the exhibit how would the administrator complete this request?
- A. Create the volume after consolidating the capacity
- B. Create the volume after performing space reclamation
- C. Create the volume after adjusting the preservation capacity
- D. Create the volume from the available capacity
Answer: D
NEW QUESTION 96
Exhibit:
Referring to the exhibit, which cable is an InfiniBand 4X connector?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 97
You want to find detailed information about the devices that are connected to the Brocade switch.
In this scenario, which command would accomplish this goal?
- A. portloginshow <port>
- B. zoneshow
- C. switchshow
- D. nsshow
Answer: A
NEW QUESTION 98
The system automatically disables write caching when _________. (Choose the best answer.)
- A. a disk pool is being expanded by adding a drive
- B. there is a failed controller on the system, so that cache mirroring is unavailable
- C. more than 4 unique host identifiers are trying to access the same volume
- D. the system detects a small percentage of cache hits over a 10-minute timeframe
- E. a failed disk drive has put a volume group into a degraded state
Answer: E
NEW QUESTION 99
A customer is configuring an EF570 system on an internal network. Due to security concerns, the network does not have Internet access. The customer wants to regularly send standard support data to NetApp.
In this scenario, what should the customer do to accomplish this task?
- A. Open a support ticket with NetApp to enable AutoSupport local functionality, manually move the data to a server with Internet access, and then send the data to NetApp.
- B. Enable AutoSupport with a set interval and with the store locally option selected, manually move the data to a server with Internet access, and then send the data to NetApp.
- C. Set up a script to initiate Collect Support Data on a set interval, manually move the data to a server with Internet access, and then send the data to NetApp.
- D. Set up a script to initiate Collect Support Data, remove the extra log files, manually move the data to a server with Internet access, and then send the data to NetApp.
Answer: B
NEW QUESTION 100
What term describes an E-Series cache mechanism that is periodically writing data to disk?
- A. Filling
- B. Cleaning
- C. Scrubbing
- D. Flushing
Answer: D
NEW QUESTION 101
With a system cache block size of 32K, how much cache space per I/O is "lost" if incoming I/Os are all 48K writes? (Choose the best answer.)
- A. 24K
- B. 0 - no space is lost
- C. 16K
- D. 4K
- E. 8K
Answer: C
NEW QUESTION 102
What are two base host connectivity selections that are provided by the E2800 controller? (Choose two.)
- A. SAS
- B. FC
- C. iSCSI
- D. IB
Answer: B,C
NEW QUESTION 103
If there is a power outage to the controllers, what happens to data in cache?
- A. Data in cache is lost because cache RAM is volatile.
- B. Data in cache is not lost because cache is ROM technology.
- C. Data in cache is not lost because cache is backed up by batteries.
- D. Data in cache is not lost because controllers are always connected to UPS devices.
Answer: C
NEW QUESTION 104
......
Powerful NS0-516 PDF Dumps for NS0-516 Questions: https://prepaway.updatedumps.com/NetworkAppliance/NS0-516-updated-exam-dumps.html